Ok, ska checka det. Tack för hjälpen!Maercosh skrev:Jag har problemet just nu fast med 7.4 Lipo och AB mosfet. Jag skulle rekommendera 11.1V lipo med ungefär 30c discharge(sålänge du använder mosfet såklart)
Cybergun SIG 552 Problem
Re: Cybergun SIG 552 Problem
Re: Cybergun SIG 552 Problem
Så här sa en bra tech jag pratat med:
Well this problem is due to there not being enough voltage from the battery to turn the gears over. Hence, the cutoff lever gets stuck in a half cycle, and it gets in the way of the trigger trolley, so you cant pull the trigger either. But your battery could be fine, and you could just be spamming semi REALLY fast, that would cause it too. Make sure you pull the trigger all the way back every semi shot and let go to the reset point everytime as well. To fix this, you could get a motor with more torque, but I feel that the better option would be to run a stronger voltage battery. A mosfet would be needed as well!
Well this problem is due to there not being enough voltage from the battery to turn the gears over. Hence, the cutoff lever gets stuck in a half cycle, and it gets in the way of the trigger trolley, so you cant pull the trigger either. But your battery could be fine, and you could just be spamming semi REALLY fast, that would cause it too. Make sure you pull the trigger all the way back every semi shot and let go to the reset point everytime as well. To fix this, you could get a motor with more torque, but I feel that the better option would be to run a stronger voltage battery. A mosfet would be needed as well!